Stained Glass Effect Static Window Cling/Privacy Film - Mystic
Enhance your view, or add privacy, with this beautiful static window cling featuring a mystical scene.
Available in a round, square or recntangular pairs for bow/stern doors. Please measure the GLASS of your window to order the correct size (glass if often up to 5cm smaller than the porthole frame itself), for example you may find that the 42cm cling will fit a 46cm frame. Your image will be supplied on a white backing sheet. Circles will be printed with a clear surround, bow/stern doors will be printed as 1 piece and will need to be trimmed to shape using a sharp pair of scissors. We recommend making a template of your window glass to reduce the change of error. When not in use, your cling can be placed back on the backing sheet, and rolled or laid flat for storage.
If ordering for bow/stern doors please order "custom" and state the measurements of your glass in cm in the personalisation box.
Your item will be delivered in a cardboard postal tube, wrapped in acid free paper for protection. Please retain the packaging for storing your cling when not in use.
Please note that although we have tried to be as accurate as possible with colour representation, this can vary due to differences in computer screens etc. The colours will also be affected by different external environments, ie sunshine, greenery, adjacent boats etc.
So what is a window cling?
- Window cling does not use an adhesive to "stick" to the window, they use static.
- They will "stick" firmly to the window but can be removed and repositioned without leaving any sticky residue.
- Window Clings are applied to the inside of the window.
- Full colour, high resolution digital printing
- Strong static cling adhesion
- Non-yellowing
How to apply your window cling/Returns policy
Please note in thes application instructions the term "Window Stickers" and "stickers" refers to window clings, not adhesive stickers
Step 1
It's very important to make sure that the inside surface of the window is clean and free of dust before trying to apply the sticker. We recommend using just water, but if you use a window cleaning solution, please ensure it has completely dried or evaporated before continuing.
Step 2
Carefully peel the window sticker from the sheet, trying not to touch the "sticky" surface underneath.Step 3
Gently stick down one edge of the sticker (such as the right hand side). Run a squeegee (or a credit card wrapped in a paper towel) across the sticker (from right to left in this example) to prevent air from being trapped underneath the sticker.Step 4
Once the sticker has been applied, check for any air bubbles beneath the vinyl. If air is trapped, use a squeegee (or a credit card wrapped in a paper towel) to push the air to the outside of the sticker. If this doesn't work, carefully remove the sticker and try again from Step 1.
Disclaimers
Please satisfy yourself that you are confident of how to apply your sticker on to your chosen surface before attempting application. The Crafty Floater cannot be held responsible for a poor or failed application. Do not attempt to apply the stickers in very cold or very hot temperatures.Returns
Once removed from the backing sheet and/or trimmed we cannot accept returns on this product